This is the power supply for FYRALL. It cleans and regulates "POSITIVE 9 VOLTs" for the circuits.

This is spesal cuck processor. It generates a reference voltage called "MIDO" which looks like a whirlpool in symblage. It dwells around 4.5 Volts, modulated by the input signal.

SECTION Z

In section Z there are a total of 6 sawtooth oscillators in this section, which modulate each other in a woven loop:

In this loop, an up-stab sawtooth,
,
modulates a down-stab sawtooth,
,
makes a modulation spiral like so:

This is not a loop, but a spiral of paradox.

These are 2 of the six oscillators.
-ZE is a current node, representing a link in the wheel of modulation in the Z-triad
-ZT is a very malleable node which is the inner workings of each "Z" rhythm
-ZC is a spiky node which represents the tick tock clock out going into section C

Think of complementary spike oscillators as a "KING'S FACE"

The "KING'S FACE" exchanges current laterally in the Z-triad. Orranger Select comes from section O to be multiplied in this lateral current chain. The KINGS FACE outputs count spikes to section C, as well as its own sawtooth shape in cloud bubble format.

Now get three King's Faces together,
all soak orrangers
and all let flow wiggles and countspikenards
Their "lateral current chain" connections are woven,

So that up-stab receives from down-stab,
It iss...
trangle spyral

SECTION C

Section C receives count spikes from Section Z and uses them to step up and down a triplet of counten temples. The temples can syncronize each other to each otherz' heights, but this action can cause a hypersonic paradox to occur as well. The "counten-temples" release a 4-piece code, which when mixed through the properly-ratioed resistors, makes a stepping temple wave.


This is a SHMANCE COUNTEN OBJECT-TEMPLE
a now raring chip, CD40193 binary up/down countre

This is CD4077, an XNOR function similar to multiplacation

This is the SECTION C triad of counten-temples and XNORz. It takes a buncha count-spike-nards from Section Z, and it lets flow counten-temple waveforms in cloud-bubble format.
-CL is a sensitive node which causes the counten temple things to freak
-CM is a sensitive node which manipulates the codes of the counten-temple things.

SECTION O

In this section O
take all the sawtooth signals from section Z
and all the temple signals from section C
custom route them with yur "U-strip" connections
then feed them thru multiplexer, which is a sort of desider trainyard,
it is controlled by digital codes (SELECT JOINT) from section C
So we are remixing all the signals and routing them back
As ORRANGER SELECT for section Z.

A tube for every purpose makes a multipurpose tube.
CD4052 sh'mance multipurpose tube
strives like all man made tubes
to pass material without disturbing it
It also desides 4 portals into 1
based on 2-part code

im captain picard
ur gordi laforge

This is the SECTION O scheme
-OC represents a digital code derived from counten-temple signals in the C-section (SELECT JOINT)
-OR represents all the cloud-bubble signals from all over, which input into the desider tubes of this section
-ON disables the O section
-OZ is the orranger select output of this section, which goes back to section Z, as well as section P:

SECTION P

There are two of these creatures fit onto the circuit board
They are sort of "para-site":
They do not participate in the ZCO wovenness,
They only react to ORRANGER SELECT PATTERNS,
Creating simple sawtooths based on the height of the pattern.

They take in orranger select and exponentially convert it, into an oscillator and output:
-PO is where P intercepts ORRANGER SELECT from O
-PT is the inner workings of parasitic oscillators.
-PC is safety capacitor output, open-ended output of parasitic oscillators.

This is one of dem exponential converters. Hard to explain.